Dura’s single screw extruders are designed to achieve higher outputs at lower electrical power consumption. These extruders are suitable to be used for producing PE/ PPR pipes for drinking water, irrigation, plumbing, casing, conduct applications etc.
| MODEL | Dura-45 | Dura-60 | Dura-75 | Dura-90 | Dura-120 | Dura-150 | ||||
| SCREW DIAMETER | 45 | 60 | 75 | 90 | 120 | 150 | ||||
| POWER | 45 | 90 | 110 | 132 | 160 | 185 | 250 | 315 | 355 | 400 |
| L/D | 36 | 36 | 38 | 36 | 38 | 36 | 38 | 36 | 38 | 36 |
| SCREW SPEED | 187 | 187 | 185 | 150 | 187 | 136 | 107 | 107 | 94 | 94 |
| DESIGNED OUTPUT | 100-150 | 250-300 | 400-450 | 450-550 | 600-700 | 700-800 | 900-1000 | 800-900 | 1000-1200 | 1300-1500 |
| DIMENSION(L*W*H) | 2200*1440*1950 | 3000*1440*2000 | 3660*1550*2200 | 4230*1675*2200 | 5370*1860*2400 | 6630*1920*2450 | ||||
| Down stream model | Pipe diameter range (mm) | Vacuum calibration tank | Spraying cooling tank | Hauler | Cutter | ||||
| Vacuum pump | Water pump | Length | Water pump | Tank | Pedrail quantity | Motor | Cutting type | ||
| GF-45/33 | 16-63 | 2.2kwx2 | 2.2kwx2 | 6000 | 2.2kwx1 | 6000mm | 2 | 1.5kwx2 | Non-dust cutting |
| GF-60/33 | 63-110 | 4.0kwx1 | 3.0kwx1 | 6000 | 2.2kwx1 | 6000mm | 2 | 2.2kwx2 | Non-dust cutting |
| GF-60/33/2 | 20-63 | 2.2kwx2x2 | 2.2kwx2x2 | 6000 | 2.2kwx1 | 6000mm | 2 | 1.5kwx2 | Non-dust cutting |
| GF-60/33 | 63-160 | 3.0kwx2 | 4.0kwx2 | 6000 | 3.0kwx1 | 6000mm | 3 | 1.1kwx3 | Non-dust cutting |
| GF-75/33 | 63-250 | 4.0kwx2 | 5.5kwx2 | 8000 | 5.5kwx1 | 6000mm | 4 | 1.1kwx4 | Non-dust cutting |
| GF-90/33 | 110-450 | 5.5kwx2; 7.5kwx1 | 7.5kwx2 | 11000 | 5.5kwx1 | 6000mm | 6 | 1.1kwx6 | Non-dust cutting |
| GF-120/33 | 315-630 | 7.5kwx2 | 7.5kwx2 | 11000 | 7.5kwx1 | 6000mm | 6 | 1.1kwx6 | Non-dust cutting |
| GF-120/33 | 355-800 | 5.5kwx2(1500mm) | 5.5kwx2(1500mm) | 1500 | 5.5kwx1 | 6000mm | 8 | 1.1kwx8 | Non-dust cutting |
| 7.5kwx2(10500mm) | 7.5kwx2(10500mm) | 10500 | |||||||
| GF-150/33 | 630-1200 | 5.5kwx2(1500mm) | 7.5kwx2(1500mm) | 1500 | 7.5kwx1 | 6000mm | 10 | 1.1kwx10 | Non-dust cutting |
| 5.5kwx4(10500mm) | 5.5kwx4(10500mm) | 10500 | |||||||
